Specs

iRig Stomp I/O Specifications

Common

  • Conversion: 24-bit A/D, 24-bit D/A
  • Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
  • Power: USB bus powered (when used with a computer) or DC IN
  • Device Connection: USB B-Type and Mini-DIN
  • Enclosure: metal sheet

Microphone Input

  • Connector: balanced female 3-pin XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
  • Microphone Input Level: from 6 mVpp to 1.4 Vpp
  • Microphone Input Impedance: approx 2 kOhms
  • Gain Range: approx 48 dB
  • Phantom Power: +48V ± 4V
  • Frequency Response: 20 Hz – 20kHz +/-1.5dB
  • Input Noise: -103 dB(A), -97 dB RMS

Instrument Input

  • Connector: unbalanced, Hi-Z, TS 1/4" Jack. Tip: signal / Shield: ground
  • Instrument Input Level: from 30mVpp to 6.9Vpp
  • Instrument Input Impedance: 1MOhms
  • Gain Range: approx 27dB
  • Frequency response: 20 Hz – 20kHz +/-1.5dB
  • Input Noise: -103 dB(A), -97 dB RMS

Stereo Headphone Output

  • Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
  • Headphone Level control: numbered thumbwheel
  • Headphone Output Power: 100mW into 50Ohms

Stereo Line Output

  • Connector: 2x balanced female 1/4" TRS Jack. Tip: hot / Ring: cold / Shield: ground
  • Maximum Output Level: +16 dBu into 600 Ohms balanced load
  • Output Impedance: 150 Ohms balanced
  • Floating Balanced Outputs

MIDI Input/Output

  • Connector: 2x 5-pin DIN

Connections and Controls

Top Panel

  • Four metal foot-switches with one indication LED each, dual color
  • Two analog potentiometers for Input GAIN and output VOLUME
  • "Stomp MODE" LED
  • "Phantom 48V" LED
  • "PEDAL" LED
  • 4 segments mono input level meter (peak)
  • 4 segments device output meter
  • Continuous pedal (expression pedal) with virtual switch at the top of its travel

Rear Panel

  • Neutrik Combo socket for MIC input and Instrument input (auto selecting)
  • +48V phantom power switch
  • 1/4" headphones output
  • 2 x 1/4" TRS Balanced floating line outputs
  • MIDI I/O 5-pin DIN connectors
  • 2 x 1/4" TRS External controllers sockets
  • B-Type USB socket for connecting a computer (Mac/PC)
  • Mini-DIN "iOS" connector for connecting an iOS device
  • Barrel DC-in socket for powering up the Stomp I/O and charging the iOS device
    at the same time

Package includes

  • iRig Stomp I/O
  • Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
  • USB A-Type to USB B-Type connection cable (2.5m/8.2ft)
  • DC power supply

Dimensions

  • Size: 41.5cm/16.3" x 21cm/8.5" x 7.2cm/2.83"
  • Weight: 3.2kg/7.1lb
  • Lightning to Mini-DIN connection cable (60cm/23.62")
  • USB A-Type to USB B-Type connection cable (2.5m/8.2ft)

Compatibility

iOS Devices

Made for: iPhone 8 Plus, iPhone 8, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (10.5-inch), iPad Pro (12.9-inch) 2nd generation, iPad Pro (12.9-inch) 1st generation, iPad Pro (9.7-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 5th generation, iPad 4th generation.

Also compatible with all newer iPhone, iPad and iPod touch models.

*Note for iPhone 7, iPhone 7 Plus, iPad 9.7-inch (6th generation 2018) users: iOS 12 or later is required.

Computers

Mac®: Mac OS X 10.6 or later. One free USB port.

Windows®: One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed. Download the iRig ASIO driver here.

image
Made for iPhone, iPad, iPod

*Legal detail | Warranty

SPECIAL OFFERS8 THIS MONTH
x

We use cookies and other tracking technologies to improve your browsing experience on our site, show personalized content and targeted ads, analyze site traffic, and understand where our audience is coming from. To find out more or to opt-out, please read our Cookie Policy. To learn more, please read our Privacy Policy.

Click below to consent to our use of cookies and other tracking technologies, make granular choices or deny your consent.

 


Loading...